Phone
The UGP Phone profile (PHN), complete in v1.0: surface zones, key and secondary functions, display faults, tracked parts, kit, battery and photo set.
The Phone profile is complete in v1.0. Its class code in a core code is PHN.
Surface zones
| Zone | Covers |
|---|---|
| AA | The display and every camera lens cover |
| A | The front surface excluding the display, plus the front sensor and fingerprint areas |
| B | Back, sides, buttons, SIM tray, logos, ports area, mesh and visible screws |
| C | Connectors and contacts |
The tolerance table gives the most each zone allows per grade.
Functions
Key functions, where a failure is FK: powers on and off; the display shows an image; touch; SIM detected (cellular models); calls with a working earpiece and microphone; charges.
Secondary functions, where a failure is FM or FJ: speakers; every camera and the flash; Face ID, Touch ID or fingerprint; buttons and switches; proximity, light and motion sensors; vibration; Wi-Fi, Bluetooth, GPS and NFC; wireless charging and the headset jack where fitted.
Any fault, key or not, means no grade. §7.4
Display faults
| Fault | Code | Severity |
|---|---|---|
| 1–3 dead pixels | DSP-01 | minor |
| More than 3 dead pixels, or a dead line | DSP-02 | major |
| Burn-in | DSP-03 | major |
Parts, kit and battery
- Tracked parts: battery, display, rear camera(s), front camera, logic board. §10.2
- Kit components: box, charging cable, documentation and SIM tool where originally supplied, plus anything else the manufacturer shipped. §10.4
- Battery: the operating system's health reading or a diagnostic tool reading (measured), or a declaration (declared). §8
Photo set for V1 evidence
Front (screen off, then screen on white); back; each side; top and bottom; the display at 45°; a close-up of every defect at S3 or above; the IMEI screen. Photos are taken on a neutral background under protocol lighting, with no seller labels and with EXIF and location data removed. §14.2